Panel spacer (BOB-PT60) is a component placed between two metal sheets during cold room panel production, before polyurethane injection. The primary function of this panel spacer is to keep the distance between the two sheets fixed at the standard 60 mm dimension.

During application:

• The bottom sheet is laid in position
• The panel spacer is placed between the two sheets
• The top sheet is positioned
• The dimension is preserved until polyurethane injection

This process prevents the top sheet from collapsing, bending, or losing dimensional accuracy before and during polyurethane foaming.

Special Design for 60 mm Cold Room Panels

The panel spacer BOB-PT60 is designed exclusively for 60 mm (6 cm) thick cold room panels. This thickness is widely used in many freezer panels and cold storage panel applications.

By using this panel spacer:

• Panel thickness remains consistent throughout production
• The same dimension is achieved in every panel
• Dimensional uniformity is ensured in mass production

This feature provides a significant advantage for facilities producing large volumes of panels.

Direction-Independent Geometry: Always 60 mm

One of the most distinctive features of the BOB-PT60 panel spacer is its direction-independent geometric structure. Regardless of how the panel spacer is placed between the two metal sheets, it always guarantees a 60 mm spacing.

This means:

• The panel spacer has no orientation (no top, bottom, front, or back)
• Operators do not need to consider placement direction
• Correct measurement is achieved even with random placement

This eliminates operator-related errors and significantly increases production speed. As a panel spacer, BOB-PT60 minimizes dependency on manual precision.

Dimensional Protection Before and During Polyurethane Injection

In cold room panel production, polyurethane injection directly affects insulation performance. During injection, pressure or expansion can cause the top sheet to move downward if not supported correctly.

The panel spacer:

• Prevents the top sheet from collapsing
• Keeps the distance between sheets stable
• Eliminates dimensional loss during polyurethane expansion

As a result, the final cold storage panel is produced with uniform thickness and a homogeneous internal structure.

Easy Fixation: Practical Application with Paper or Nylon Tape

The BOB-PT60 panel spacer can be easily fixed to the bottom sheet using paper tape or nylon tape during production. This fixation prevents the panel spacer from shifting before polyurethane injection.

Advantages of this method:

• No screws or additional fasteners required
• Fast and practical application
• No slowdown in the production line

This simplicity makes the panel spacer ideal for high-speed production environments.

Suitable for Cold Room, Freezer, and Cold Storage Panel Production

The panel spacer is safely used in the production of:

• Cold room panels
• Freezer (buzhane) panels
• Cold storage panels

In these panel types, dimensional accuracy is critical for insulation performance, panel alignment, and on-site installation quality. The panel spacer directly supports these requirements.

Production Efficiency and Quality Standardization

The panel spacer BOB-PT60 not only maintains dimensions but also optimizes the entire production process:

• Increases production speed
• Reduces defective panel rates
• Eliminates out-of-tolerance measurements
• Improves overall product quality

These benefits reflect Bob Modüler’s engineering-driven approach to manufacturing excellence.

Bob Modüler Manufacturing Assurance

With extensive experience in refrigeration systems and panel production equipment, Bob Modüler manufactures the panel spacer BOB-PT60 in accordance with high quality standards. The product is developed based on real production needs and feedback from cold room panel manufacturers.

Why Choose Panel Spacer BOB-PT60?

• Specially designed for 60 mm cold room panel production
• Maintains dimensions before polyurethane injection
• Direction-independent geometric design
• Guaranteed 60 mm spacing in all placements
• Prevents top sheet collapse
• Easy fixation with paper or nylon tape
• Suitable for freezer panels and cold storage panels
• Ideal for mass production
• Trusted Bob Modüler manufacturing quality

The Panel Spacer (BOB-PT150) is placed between the lower and upper metal sheets on the cold room panel production line before polyurethane injection. Its primary function is to set and maintain a precise and unchanging 150 mm spacing between the two sheets throughout the entire production cycle.

During manufacturing, BOB-PT150:

• Establishes the correct panel thickness before sheet bonding
• Prevents the upper sheet from sagging under its own weight
• Provides resistance against internal pressure during polyurethane injection

With these characteristics, the product functions not merely as a panel spacer, but as a core dimensional control mechanism for extra-thick panel production.

Purpose-Built Structure for 150 mm Panel Thickness

The Panel Spacer BOB-PT150 is developed exclusively for 150 mm (15 cm) panel production. This focused engineering approach delivers greater stability and reliability compared to general-purpose spacers. Panels of this thickness are widely used in freezer panels and large-scale cold storage panels, where energy efficiency and dimensional precision are essential.

When this panel spacer is used:

• Uniform thickness is achieved across the entire panel surface
• Dimensional fluctuations are completely eliminated
• Installation gaps and alignment issues are prevented
• Thermal insulation performance reaches maximum efficiency

Orientation-Free and Balanced Geometry for Error-Free Placement

One of the most important technical advantages of the BOB-PT150 Panel Spacer is its fully orientation-free and symmetrical geometric design. The spacer:

• Can be flipped
• Rotated
• Placed sideways

and will always maintain an exact 150 mm distance between the two metal sheets.

This design:

• Eliminates the need for placement direction checks
• Removes operator-related dimensional errors
• Improves production speed and standardization

Such features are especially valuable in high-volume serial manufacturing environments.

Dimensional Stability During Polyurethane Injection

In panels as thick as 150 mm, polyurethane injection generates substantial expansion forces. Without sufficient support, these forces can cause thickness reduction or internal inconsistency.

The Panel Spacer BOB-PT150:

• Prevents downward movement of the upper sheet
• Balances polyurethane expansion forces
• Maintains a homogeneous internal panel structure

As a result, the finished cold room panel fully complies with both dimensional and insulation standards.

Fast, Clean Fixation with Tape

The Panel Spacer can be quickly fixed to the lower metal sheet using paper tape or nylon tape during production. This fixation method:

• Prevents the spacer from shifting before injection
• Requires no screws or mechanical fasteners
• Does not slow down the production line

This clean and practical application method provides significant time and labor savings for high-capacity manufacturers.

Fully Compatible with Cold Room, Freezer, and Cold Storage Panel Production

The Panel Spacer BOB-PT150 is suitable for use in the production of:

• Cold room panels
• Freezer (buzhane) panels
• Cold storage panels

In these applications, dimensional precision directly affects insulation efficiency, sealing performance, and long-term operational reliability.

Standardization and Quality Continuity in Production

By integrating the Panel Spacer BOB-PT150 into the production process:

• Defective panel rates are minimized
• Post-production correction requirements are eliminated
• Dimensional tolerances are kept under strict control
• Overall product quality becomes consistent and repeatable

These advantages reflect Bob Modüler’s engineering-oriented manufacturing philosophy.

Bob Modüler Manufacturing Assurance

With extensive experience in cold room systems and panel production equipment, Bob Modüler has developed the Panel Spacer BOB-PT150 for professional manufacturing lines. The product is reusable, dimensionally guaranteed, and fully compatible with serial production requirements.

Why Choose Panel Spacer BOB-PT150?

• Dedicated solution for 150 mm cold room panel production
• Maintains precise spacing before and during polyurethane injection
• Orientation-free, symmetrical geometric design
• Eliminates operator-related placement errors
• Prevents upper sheet sagging
• Fast and clean fixation with tape
• Compatible with freezer panels and cold storage panels
• Ideal for very thick panel manufacturing
• Backed by Bob Modüler manufacturing expertise

The Panel Spacer (BOB-PT120) is positioned between the lower and upper metal sheets during cold room panel production before polyurethane injection. Its primary function is to maintain a constant and uninterrupted 120 mm spacing between the two sheets.

During production, the panel spacer:

• Establishes the correct spacing before the sheets are fixed
• Prevents the upper sheet from bending downward under its own weight
• Balances internal pressure generated during polyurethane injection

With these functions, BOB-PT120 is not merely a panel spacer—it is a core dimensional control element for high-thickness panel manufacturing.

Reinforced and Stable Design for 120 mm Panel Thickness

The Panel Spacer BOB-PT120 is engineered exclusively for 120 mm (12 cm) panel production. This dedicated design provides superior stability compared to general-purpose spacers. Panels of this thickness are widely used in freezer panels, industrial cold rooms, and high-capacity cold storage panels, where insulation performance and dimensional accuracy are critical.

By using this panel spacer:

• Uniform thickness is achieved across the entire panel surface
• Dimensional fluctuations are fully eliminated
• Installation alignment issues are prevented
• Thermal insulation performance is maximized

Orientation-Free (Symmetrical) Geometry for Error-Free Placement

One of the most important technical advantages of the BOB-PT120 Panel Spacer is its fully symmetrical, orientation-free geometric design. The spacer can be:

• Flipped upside down
• Rotated in any direction
• Placed laterally

and it will always provide an exact 120 mm spacing between the two metal sheets.

This design:

• Eliminates the need for orientation checks during placement
• Removes operator-related measurement errors
• Improves production speed and process consistency

This feature is especially valuable in serial production environments.

Dimensional Control During Polyurethane Injection

In panels with a thickness of 120 mm, polyurethane injection generates significant expansion forces that can compromise dimensional stability if not properly controlled.

The Panel Spacer BOB-PT120:

• Prevents downward movement of the upper sheet
• Controls polyurethane expansion forces
• Ensures a homogeneous internal panel structure

As a result, the finished cold room panel fully complies with dimensional and insulation standards.

Fast and Clean Fixation with Tape

The Panel Spacer can be easily fixed to the lower metal sheet using paper tape or nylon tape during production. This fixation method:

• Prevents the spacer from shifting prior to polyurethane injection
• Requires no screws or mechanical fasteners
• Does not slow down the production process

This practical solution is ideal for high-volume manufacturing lines.

Suitable for Cold Room, Freezer, and Cold Storage Panel Production

The Panel Spacer BOB-PT120 is suitable for use in the production of:

• Cold room panels
• Freezer (buzhane) panels
• Cold storage panels

In these applications, dimensional precision directly affects insulation efficiency, installation quality, and long-term operational reliability.

Standardization and Quality Improvement in Production

By integrating the Panel Spacer BOB-PT120 into the production process:

• Defective panel rates are significantly reduced
• Post-production corrections are eliminated
• Dimensional tolerances are kept under strict control
• Final product quality becomes consistent and predictable

These advantages reflect Bob Modüler’s engineering-driven manufacturing philosophy.

Bob Modüler Manufacturing Assurance

With extensive experience in cold room systems and panel production equipment, Bob Modüler has developed the Panel Spacer BOB-PT120 for professional manufacturing lines. The product is reusable, dimensionally reliable, and fully compatible with serial production requirements.

Why Choose Panel Spacer BOB-PT120?

• Dedicated solution for 120 mm cold room panel production
• Maintains spacing before and during polyurethane injection
• Orientation-free symmetrical geometry
• Eliminates operator-related errors
• Prevents upper sheet sagging
• Quick and clean fixation with tape
• Compatible with freezer panels and cold storage panels
• Ideal for high-thickness panel manufacturing
• Backed by Bob Modüler manufacturing expertise

The Panel Spacer (BOB-PT100) is positioned between the lower and upper metal sheets during cold room panel production before polyurethane injection. Its primary function is to maintain a fixed and unchanging 100 mm spacing between the two sheets.

During the production process, the panel spacer:

• Preserves the target dimension before sheet bonding
• Prevents the upper sheet from bending or sagging under its own weight
• Maintains spacing stability during polyurethane foaming

In this respect, BOB-PT100 is not merely a panel spacer—it is a dimensional assurance component for high-thickness panel production.

Optimized Structure for 100 mm Panel Thickness

The Panel Spacer BOB-PT100 is exclusively engineered for 100 mm (10 cm) panel production. This focused design ensures higher stability and reliability compared to general-purpose spacers. Panels with 100 mm thickness are commonly used in freezer panels and cold storage panels where superior insulation performance is required.

By using this panel spacer:

• Uniform thickness is achieved across the entire panel surface
• Post-production dimensional variations are eliminated
• Installation compatibility is improved
• Thermal insulation performance is maximized

Orientation-Free Symmetrical Geometry

One of the most significant technical advantages of the BOB-PT100 Panel Spacer is its fully symmetrical, orientation-free geometry. The spacer can be:

• Placed upside down
• Rotated in any direction
• Positioned laterally

and it will always maintain a 100 mm gap between the two metal sheets.

This design:

• Removes the need for orientation checks during placement
• Eliminates operator-related measurement errors
• Improves production speed and process standardization

Dimensional Stability During Polyurethane Injection

During polyurethane injection, internal expansion pressure can exert downward force on the upper metal sheet. In thick panels, this force significantly increases the risk of dimensional collapse.

The Panel Spacer BOB-PT100:

• Prevents downward movement of the upper sheet
• Balances polyurethane expansion forces
• Ensures a homogeneous internal panel structure

As a result, the finished cold room panel fully complies with dimensional and insulation standards.

Fast and Clean Fixation with Tape

The Panel Spacer can be easily fixed to the lower metal sheet using paper tape or nylon tape. This fixation method:

• Prevents movement prior to polyurethane injection
• Requires no screws, clips, or mechanical fasteners
• Does not interrupt production flow

This practical approach offers significant time savings in serial manufacturing environments.

Compatible with Cold Room, Freezer, and Cold Storage Panel Production

The Panel Spacer BOB-PT100 is suitable for the production of:

• Cold room panels
• Freezer (buzhane) panels
• Cold storage panels

In these applications, dimensional accuracy directly impacts insulation performance, installation precision, and long-term reliability.

Improves Overall Production Quality

Integrating the Panel Spacer BOB-PT100 into the production process:

• Significantly reduces defective panel rates
• Eliminates the need for post-production corrections
• Keeps dimensional tolerances under strict control
• Enhances final product quality

These benefits reflect Bob Modüler’s engineering-driven manufacturing philosophy.

Bob Modüler Engineering and Manufacturing Assurance

With extensive experience in cold room systems and panel production equipment, Bob Modüler designs the Panel Spacer BOB-PT100 for professional production lines. The product is reusable, dimensionally reliable, and optimized for serial manufacturing.

Why Choose Panel Spacer BOB-PT100?

• Dedicated solution for 100 mm cold room panel production
• Maintains spacing before and during polyurethane injection
• Orientation-free geometric design
• Eliminates operator-related errors
• Prevents upper sheet sagging
• Quick and clean fixation with tape
• Suitable for freezer panels and cold storage panels
• Ideal for serial production
• Backed by Bob Modüler manufacturing expertise

The Panel Spacer (BOB-PT80) is placed between the lower and upper metal sheets on the production line before polyurethane injection. Its primary function is to establish and maintain a fixed 80 mm spacing between the sheets throughout the process.

During manufacturing, the panel spacer:

• Preserves the target dimension before sheets are bonded
• Prevents the upper sheet from sagging under its own weight
• Maintains spacing during polyurethane expansion

In this sense, BOB-PT80 is not just a panel spacer—it acts as a process safeguard that protects dimensional accuracy from start to finish.

A Stable, Dedicated Solution for 80 mm Panel Thickness

The Panel Spacer BOB-PT80 is engineered exclusively for 80 mm panel production. This focused design enhances reliability and stability, especially for freezer panels and cold storage panels where higher insulation requirements are common.

With BOB-PT80 in use:

• Panel thickness remains constant across the entire panel surface
• Dimensional fluctuations are eliminated
• Every panel in serial production meets the same specification

Orientation-Free Geometry: Eliminates Placement Errors

One of the most significant technical advantages of the BOB-PT80 Panel Spacer is its orientation-free (symmetrical) geometric structure. The spacer can be:

• Rotated
• Flipped
• Placed in any orientation

and it will always create an 80 mm gap between the two metal sheets.

This design:

• Removes the need for “correct orientation” during placement
• Eliminates operator-induced measurement errors
• Increases production speed and consistency

This feature clearly differentiates BOB-PT80 from conventional panel spacers.

Dimensional Stability Throughout Polyurethane Injection

During polyurethane foaming, internal pressure and expansion forces can push the upper sheet downward, leading to thickness loss if insufficiently supported.

The Panel Spacer BOB-PT80:

• Prevents downward deflection of the upper sheet
• Balances polyurethane expansion forces
• Ensures a homogeneous internal panel structure

As a result, the finished cold room panel meets dimensional and insulation standards without compromise.

Quick and Clean Fixation with Tape

The Panel Spacer can be easily fixed to the lower metal sheet using paper tape or nylon tape during production. This method:

• Prevents the spacer from shifting before injection
• Requires no screws, clips, or mechanical fasteners
• Does not slow down the production line

This simple fixation method provides a major time-saving advantage for high-volume manufacturing facilities.

Compatible with Cold Room, Freezer, and Cold Storage Panel Production

The Panel Spacer BOB-PT80 is widely used in the production of:

• Cold room panels
• Freezer (buzhane) panels
• Cold storage panels

In these applications, dimensional accuracy is essential not only for insulation performance but also for installation precision and long-term reliability.

Standardizes Production Quality

By integrating the Panel Spacer BOB-PT80 into the production line:

• Defective panel rates are reduced
• Post-production corrections are eliminated
• Dimensional tolerances are consistently controlled
• Overall product quality is significantly improved

These outcomes reflect Bob Modüler’s engineering-driven manufacturing philosophy.

Bob Modüler Engineering Assurance

Bob Modüler develops solutions based on real-world production challenges. The Panel Spacer BOB-PT80 is designed for serial manufacturing, repeated use, and guaranteed dimensional accuracy—meeting the practical needs of professional cold room panel producers.

Why Choose Panel Spacer BOB-PT80?

• Dedicated solution for 80 mm cold room panel production
• Maintains spacing before and during polyurethane injection
• Orientation-free geometric design
• Eliminates operator-related placement errors
• Prevents upper sheet sagging
• Quick fixation with tape
• Compatible with freezer panels and cold storage panels
• Ideal for serial production
• Backed by Bob Modüler manufacturing expertise