The BOB-100K Hygienic Profile Corner Connector (100 mm) is used specifically at the corner transitions of the BOB-0100 hygienic corner profile. Its primary purposes include:

• Closing open gaps formed at 45° and 90° corner joints
• Preventing the entry of dust, dirt, and other contaminants
• Ensuring continuous hygienic protection at profile junctions
• Enhancing the overall aesthetic appearance of cold room interiors

Thanks to these functions, the connector is not merely an accessory but a critical hygiene component within cold room systems.

Importance of Corner Joints in Cold Rooms

In cold storage environments, hygiene risks most often originate from connection and transition points rather than from flat surfaces. At corner joints:

• Micro-gaps may remain inaccessible to cleaning tools
• Dust and particles can accumulate over time
• Moisture can combine with contaminants, promoting bacterial growth

The Hygienic Profile Corner Connector (100 mm) eliminates these vulnerabilities by providing a precise and secure closure at all corner transitions where hygienic profiles meet.

Hygiene Protection and Dust Prevention

The BOB-100K plays a vital role in maintaining the hygiene chain within cold rooms. By sealing exposed profile junctions, it:

• Prevents dust and airborne particles from entering joint areas
• Reduces the risk of recontamination after cleaning
• Supports compliance with hygiene inspections and standards

This function is especially critical in cold rooms used for food, pharmaceutical, and medical storage, where hygiene tolerances are extremely strict.

Aesthetic Completion and Professional Appearance

Beyond hygiene, modern cold room projects also require a clean and professional visual finish. The Hygienic Profile Corner Connector (100 mm):

• Provides smooth and uniform corner transitions
• Conceals cut edges of hygienic corner profiles
• Creates a refined and well-finished interior appearance

By eliminating visible gaps and rough edges, the connector contributes significantly to the overall design quality of the cold room.

Technical Specifications

• Product Name: Hygienic Profile Corner Connector (100 mm)
• Manufacturer: Bob Modüler
• Product Code: BOB-100K
• Compatible Product: BOB-0100 Cold Room Hygienic Corner PVC Profile (100 mm)
• Application Purpose: Corner joint connection and gap sealing
• Applicable Angles: 45° and 90° corner transitions
• Functions: Hygiene protection, dust prevention, aesthetic finishing
• Application Area: Modular and industrial cold room systems

Application Areas

The Hygienic Profile Corner Connector (100 mm) is suitable for all cold room installations where BOB-0100 hygienic corner profiles are used. Typical application areas include:

• Food storage cold rooms
• Meat, poultry, and seafood processing facilities
• Dairy production and storage plants
• Fruit and vegetable cold storage warehouses
• Pharmaceutical and medical storage rooms
• Logistics and distribution centers
• Industrial kitchens and catering facilities
• Hotel, restaurant, and supermarket cold rooms

In all these environments, hygienic corner profile applications are considered incomplete without the BOB-100K connector.

Full Compatibility with Modular and Industrial Systems

The BOB-100K Hygienic Profile Corner Connector is fully compatible with both modular and industrial cold room systems. It integrates seamlessly with the hygienic corner profile during installation, without requiring additional processing or modifications.

This compatibility simplifies installation, reduces labor time, and minimizes the risk of assembly errors.

Bob Modüler Manufacturing Assurance

Bob Modüler is a specialized manufacturer with extensive experience in cold room systems and hygienic construction solutions. The BOB-100K Hygienic Profile Corner Connector (100 mm) is developed based on real installation conditions and strict quality standards.

Manufacturing advantages include:

• High-quality local production
• Precise dimensional accuracy
• Long service life
• Reliable performance in professional projects

Conclusion

The Hygienic Profile Corner Connector (100 mm) is an indispensable complementary component for cold rooms using the BOB-0100 Cold Room Hygienic Corner PVC Profile (100 mm). By sealing gaps at 45° and 90° corner transitions, it prevents dust and contaminants from entering, maintains hygiene continuity, and provides a clean, aesthetic finish. Manufactured by Bob Modüler, the BOB-100K ensures that cold room hygiene is protected down to the smallest detail.

The Cold Room Hygienic Corner PVC Profile (100 mm) is designed to serve two primary functions in cold storage environments:

1. Ensuring Hygiene in Cold Storage Facilities

Hygiene is a critical requirement in facilities operating cold rooms, particularly in industries subject to strict health and safety regulations. This product is used at:

• Wall-to-wall junctions
• Wall-to-floor transition points

By covering these intersections, the profile prevents the accumulation of dirt and bacteria while significantly improving cleanability. Its anti-bacterial surface property helps minimize microbial growth, supporting food safety and compliance with hygiene standards.

2. Concealing Panel Joints and Improving Aesthetics

Once cold room panels are assembled, visible edges and sharp corners may negatively affect both safety and appearance. The Cold Room Hygienic Corner PVC Profile (100 mm):

• Covers irregular or visually poor panel joints
• Creates a clean, seamless, and professional interior finish
• Protects panel edges against impact and wear

Technical and Structural Specifications

• Product Name: Cold Room Hygienic Corner PVC Profile (100 mm)
• Manufacturer: Bob Modüler
• Product Code: BOB-0100
• Profile Width: 100 mm
• Material: PVC (standard upper and lower parts made of PVC raw material)
• Temperature Resistance: Up to -45°C
• Color Options: White, Yellow, Grey
• Optional Production: Upon request, the lower V connection profile can be manufactured from aluminum
• Compatibility: Modular and industrial cold room systems

Thanks to its high-quality PVC composition, the Cold Room Hygienic Corner PVC Profile (100 mm) maintains flexibility and durability even under extreme low-temperature conditions without cracking or deformation.

Why This Profile Is Essential for Cold Storage Facilities

Cold storage facilities operate under continuous exposure to low temperatures, humidity, and intensive daily use. Every construction component used in such environments must offer durability, hygiene, and long-term performance.

The Cold Room Hygienic Corner PVC Profile (100 mm):

• Improves hygiene standards in cold storage facilities
• Helps facilities pass hygiene inspections more easily
• Reduces long-term maintenance and cleaning costs
• Provides structural protection for panel intersections

Wide Range of Applications

The Cold Room Hygienic Corner PVC Profile (100 mm) is suitable for a broad variety of sectors and facilities, including:

• Food production and cold storage facilities
• Meat and poultry cold rooms
• Fish and seafood storage areas
• Dairy processing and storage facilities
• Fruit and vegetable cold storage rooms
• Pharmaceutical and medical product warehouses
• Logistics and distribution centers
• Catering companies and industrial kitchens
• Hotel, restaurant, and supermarket cold rooms

By being installed at wall and floor junction points, the profile prevents hidden contamination zones and ensures long-term hygiene performance.

Manufacturing Quality by Bob Modüler

Bob Modüler is a specialized manufacturer with extensive expertise in cold room systems and modular construction solutions. The BOB-0100 Cold Room Hygienic Corner PVC Profile (100 mm) is developed based on real-world industry requirements and operational experience.

Key advantages include:

• Reliable local manufacturing
• High-quality raw materials
• Anti-bacterial surface technology
• Long service life
• Custom production options

Conclusion

The Cold Room Hygienic Corner PVC Profile (100 mm) is an essential accessory for modern cold storage facilities seeking maximum hygiene, durability, and visual consistency. Produced by Bob Modüler, this profile combines anti-bacterial performance, extreme temperature resistance, and versatile application capabilities, making it a trusted solution for professional cold room projects.

The BOB-70K Hygienic Profile Corner Connector (70 mm) is designed exclusively as a complementary component for the BOB-070 Cold Room Hygienic Corner PVC Profile (70 mm). Its primary purposes include:

• Closing open gaps at 45° and 90° corner transitions
• Preventing the entry of dust, dirt, and hygiene-compromising particles
• Ensuring continuity of hygienic corner profile applications
• Providing a smooth and aesthetically pleasing corner finish

With these functions, the connector is not merely an accessory but a critical hygiene element within cold room systems.

Importance of Corner Details in Small Cold Rooms

The BOB-070 hygienic corner PVC profile is commonly preferred in small and medium-sized cold rooms. In compact spaces, corner details become more visible and significantly more sensitive in terms of hygiene.

In smaller cold rooms:

• Micro-gaps can accumulate dirt more quickly
• Cleaning equipment has limited access to corner joints
• Visual imperfections are more noticeable

The BOB-70K Hygienic Profile Corner Connector resolves these issues by delivering seamless and hygienic corner transitions, even in confined spaces.

Hygiene Protection and Dust Prevention

One of the biggest hygiene risks in cold rooms arises from barely visible connection points. When used together with the BOB-070 hygienic corner profile, the Hygienic Profile Corner Connector (70 mm):

• Leaves no open gaps at corner joints
• Prevents dust and airborne particles from entering profile connections
• Reduces the risk of bacterial growth caused by trapped contaminants

This makes the product especially valuable in cold rooms used for food processing, pharmaceutical storage, and medical applications.

Aesthetic Completion and Clean Finish

Modern cold room projects demand not only hygiene but also a refined visual appearance. The BOB-70K provides:

• Concealment of cut profile edges
• Clean, symmetrical corner transitions
• A uniform and professional interior look

By eliminating rough or unfinished corner joints, the connector elevates the overall quality of cold room installations.

Technical Specifications

• Product Name: Hygienic Profile Corner Connector (70 mm)
• Manufacturer: Bob Modüler
• Product Code: BOB-70K
• Compatible Product: BOB-070 Cold Room Hygienic Corner PVC Profile (70 mm)
• Application Purpose: Corner joint connection and gap sealing
• Applicable Angles: 45° and 90° corner transitions
• Functions: Hygiene protection, dust prevention, aesthetic finishing
• Compatibility: Modular and industrial cold room systems

Application Areas

The Hygienic Profile Corner Connector (70 mm) is suitable for all cold room projects where BOB-070 hygienic corner profiles are used. Typical application areas include:

• Supermarket and delicatessen cold rooms
• Restaurant and café kitchen cold rooms
• Hotel and catering facility storage rooms
• Auxiliary cold rooms in food production plants
• Pharmaceutical and medical storage areas
• Laboratory-scale cold rooms

In these environments, complete and sealed corner details provide a significant advantage during hygiene inspections.

Full Compatibility with Modular and Industrial Systems

The BOB-70K Hygienic Profile Corner Connector is fully compatible with both modular and industrial cold room systems. It integrates effortlessly with hygienic corner profiles during installation and does not require additional machining or processing.

This simplifies installation, shortens application time, and minimizes the risk of assembly errors.

Bob Modüler Manufacturing Quality

Bob Modüler is a specialized manufacturer with strong expertise in cold room systems and hygienic construction components. The BOB-70K Hygienic Profile Corner Connector (70 mm) is developed based on real installation conditions and strict hygiene standards.

Key manufacturing advantages include:

• High-quality local production
• Precise dimensional accuracy
• Long service life
• Reliable performance in professional cold room projects

Conclusion

The Hygienic Profile Corner Connector (70 mm) is an essential complementary component for cold rooms using the BOB-070 Cold Room Hygienic Corner PVC Profile (70 mm). By sealing gaps at 45° and 90° corner transitions, it prevents dust and contaminants from entering, maintains hygienic continuity, and provides a clean, aesthetic finish. Manufactured by Bob Modüler, the BOB-70K ensures that cold room hygiene is protected down to the smallest detail, especially in compact cold room installations.

The Cold Room Hygienic Corner PVC Profile (70mm) has been developed to address two primary needs in cold storage environments, particularly in compact installations:

1. Maintaining Hygiene in Small Cold Rooms

Smaller cold rooms often require more precise hygiene management due to limited working space. Sharp panel intersections can trap contaminants and complicate cleaning routines. The BOB-070 profile:

• Is installed at wall-to-wall and wall-to-floor junctions
• Eliminates dirt-prone corner gaps
• Enhances accessibility for cleaning and sanitation

Its anti-bacterial PVC surface significantly reduces microbial growth, supporting compliance with food safety and hygiene regulations.

2. Space-Efficient Aesthetic Finishing

Compared to wider corner profiles, the Cold Room Hygienic Corner PVC Profile (70mm) offers a slimmer structure that is especially advantageous in confined cold rooms. This design:

• Preserves valuable internal volume
• Conceals exposed panel edges neatly
• Creates a clean, professional, and modern interior finish

Technical Specifications

• Product Name: Cold Room Hygienic Corner PVC Profile (70mm)
• Manufacturer: Bob Modüler
• Product Code: BOB-070
• Profile Width: 70 mm
• Material: PVC (standard upper and lower sections manufactured from PVC raw material)
• Temperature Resistance: Suitable for use down to -45°C
• Color Options: White, Yellow, Grey
• Optional Configuration: Lower V connection profile available in aluminum upon request
• Application Compatibility: Modular and industrial cold room systems

The high-grade PVC material ensures flexibility and structural stability even under extreme low-temperature conditions, preventing cracking or deformation over long-term use.

Why the 70mm Profile Is Ideal for Compact Cold Storage

Cold storage facilities vary significantly in size and operational requirements. In smaller cold rooms, every component must contribute to efficient space utilization without sacrificing performance. The Cold Room Hygienic Corner PVC Profile (70mm) is engineered precisely for this purpose.

Key Advantages Over Larger Profiles

• Reduced profile width minimizes space loss
• Optimized for small and medium-scale cold rooms
• Easier installation in confined areas
• Cost-effective solution for compact projects

These features make the BOB-070 model a practical choice for facilities where precision and efficiency are paramount.

Application Areas

The Cold Room Hygienic Corner PVC Profile (70mm) is widely used in environments where limited space and strict hygiene standards coexist, including:

• Supermarket and retail cold rooms
• Restaurant and café cold storage units
• Hotel and catering service facilities
• Pharmaceutical and medical storage rooms
• Laboratory-scale cold rooms
• Auxiliary cold rooms in food production plants
• Bakery and pastry refrigeration areas

Installed at wall and floor transition points, the profile prevents hidden contamination zones and supports long-term hygiene management.

Manufacturing Excellence by Bob Modüler

Bob Modüler is a trusted manufacturer specializing in cold room systems and modular construction components. The BOB-070 Cold Room Hygienic Corner PVC Profile (70mm) reflects the company’s commitment to quality, durability, and practical design tailored to real-world operational needs.

Key production advantages include:

• High-quality local manufacturing
• Strict quality control processes
• Anti-bacterial material technology
• Long service life with minimal maintenance
• Customizable production options

Conclusion

The Cold Room Hygienic Corner PVC Profile (70mm) is a reliable and space-efficient solution for maintaining hygiene and interior integrity in small cold storage rooms. Manufactured by Bob Modüler, this profile combines anti-bacterial performance, resistance to temperatures as low as -45°C, and a compact design that preserves usable space. It is an essential component for professional cold room installations where cleanliness, efficiency, and durability are essential.

The primary function of the Cold Room Hygienic Based PVC Profile is to maintain strict hygiene conditions in cold storage environments. Unlike general-purpose profiles, this product is engineered solely for wall-to-floor junctions at the base level of cold rooms.

When installed correctly, the profile:

• Eliminates gaps between wall and floor panels
• Prevents dirt, liquid, and bacteria from accumulating at the base
• Creates a continuous, easy-to-clean surface

By removing sharp corners and inaccessible gaps, the profile significantly improves sanitation efficiency and supports compliance with hygiene regulations.

Why Base-Level Hygiene Is Critical in Cold Rooms

In cold storage facilities, hygiene risks are not evenly distributed. The base area of cold rooms is exposed to:

• Frequent washing and sanitation
• Continuous moisture and condensation
• Foot traffic and equipment movement
• Cleaning chemicals and disinfectants

These conditions make the wall-to-floor junction a high-risk zone. The Cold Room Hygienic Based PVC Profile is designed to withstand these challenges while maintaining structural integrity and hygienic performance over time.

Anti-Bacterial PVC Structure

The BOB-059 Cold Room Hygienic Based PVC Profile is produced using anti-bacterial PVC raw material, providing long-term protection against microbial activity. This feature is essential in environments where hygiene directly impacts product safety and regulatory compliance.

Key benefits of the anti-bacterial structure include:

• Reduced bacterial adhesion on surfaces
• Minimized risk of contamination
• Long-lasting hygienic performance

This makes the profile especially suitable for cold rooms used in food, pharmaceutical, and medical storage applications.

Technical Specifications

• Product Name: Cold Room Hygienic Based PVC Profile
• Manufacturer: Bob Modüler
• Product Code: BOB-059
• Application Area: Wall-to-floor junction at the base of cold rooms only
• Material: Anti-bacterial PVC
• Temperature Resistance: Suitable for continuous use down to -45°C
• Color Options: White, Yellow, Grey
• Compatibility: Modular and industrial cold room systems

The PVC material retains flexibility even under extreme cold conditions, ensuring resistance to cracking, deformation, and material fatigue.

Compatibility with Modular and Industrial Cold Rooms

The Cold Room Hygienic Based PVC Profile is fully compatible with both modular and industrial cold room constructions. It can be used in:

• Newly constructed cold storage facilities
• Renovation and hygiene upgrade projects
• High-traffic industrial cold rooms

Its design allows for easy installation without interfering with existing panel systems, making it an efficient solution for both new and existing facilities.

Application Areas

The Cold Room Hygienic Based PVC Profile is widely used in facilities where hygiene and temperature control are critical. Typical application areas include:

• Food storage cold rooms
• Meat and poultry processing facilities
• Seafood storage and processing areas
• Dairy production and cold storage plants
• Fruit and vegetable cold warehouses
• Pharmaceutical and medical product storage rooms
• Logistics and distribution centers
• Industrial kitchens and catering facilities
• Hotel, restaurant, and supermarket cold rooms

By being installed exclusively at wall-to-floor junctions, the profile ensures that the most contamination-prone area of the cold room remains hygienic and easy to maintain.

Durability and Maintenance Advantages

The Cold Room Hygienic Based PVC Profile is designed for long-term performance under demanding conditions. Its advantages include:

• Resistance to cleaning chemicals and disinfectants
• Ability to withstand frequent washing procedures
• Reduced maintenance and repair costs
• Long service life in industrial environments

These features help facility operators reduce downtime and operating expenses while maintaining high hygiene standards.

Bob Modüler Manufacturing Expertise

Bob Modüler is a specialized manufacturer with extensive experience in cold room systems and modular construction solutions. The BOB-059 Cold Room Hygienic Based PVC Profile is developed based on real-world operational needs and strict quality standards.

Manufacturing advantages include:

• High-quality local production
• Strict quality control processes
• Hygiene-focused product engineering
• Consistent performance and reliability

Each profile is designed to meet the expectations of professional cold storage projects.

Conclusion

The Cold Room Hygienic Based PVC Profile is an essential hygiene solution for modern cold storage facilities. Produced by Bob Modüler, the BOB-059 model offers anti-bacterial protection, resistance to temperatures as low as -45°C, and a design specifically engineered for wall-to-floor junctions at the base of cold rooms.

By preventing dirt and bacterial accumulation at the most critical structural point, this profile plays a key role in maintaining hygiene, extending facility lifespan, and supporting regulatory compliance. It is a reliable and professional choice for cold rooms where cleanliness, durability, and efficiency are non-negotiable.

The BOB-053 PVC Base Profile for Cold Room Panel (80 mm) is developed to fulfill multiple critical functions that directly contribute to the long-term performance of cold room systems.

1. Reducing Thermal Bridging and Improving Energy Efficiency

Direct contact between cold room panels and the floor can create thermal bridges, leading to increased heat transfer and higher energy consumption. This base profile:

• Creates an insulating PVC layer between the panel and the floor
• Minimizes heat transfer and cold loss
• Helps maintain stable internal temperatures

As a result, refrigeration systems operate more efficiently, reducing overall operating costs.

2. Creating a Hygienic and Easy-to-Clean Base Transition

Floor-to-panel junctions are among the most challenging areas to keep clean. The PVC Base Profile for Cold Room Panel (80 mm):

• Prevents the accumulation of dirt, moisture, and bacteria
• Eliminates hard-to-clean gaps at the panel base
• Supports hygiene requirements in food and medical storage environments

The smooth PVC surface enables fast and effective cleaning, ensuring long-term hygiene.

3. Protecting the Panel Base and Extending Service Life

Thanks to its special geometric design, the profile prevents the metal sheet at the bottom of the panel from direct exposure to floor-level hazards. This design:

• Protects panel surfaces from impacts and abrasion
• Reduces corrosion risks caused by moisture
• Extends the operational lifespan of cold room panels

This protection is particularly valuable in high-traffic industrial cold room facilities.

Technical Specifications

• Product Name: PVC Base Profile for Cold Room Panel (80 mm)
• Manufacturer: Bob Modüler
• Product Code: BOB-053
• Compatible Panel Thickness: 80 mm
• Material: High-quality PVC
• Application Area: Base of cold room panels in contact with the floor
• Functions: Thermal insulation, hygiene improvement, panel protection
• Compatibility: Modular and industrial cold room systems

The PVC material maintains flexibility and structural stability even under low-temperature conditions, preventing cracking or deformation during long-term use.

Importance of 80 mm Base Profiles in Cold Room Systems

Using accessories that precisely match panel thickness is essential for system efficiency and durability. The PVC Base Profile for Cold Room Panel (80 mm) is designed to fit 80 mm panels perfectly, ensuring:

• Proper panel seating on the floor
• Reduced risk of heat loss
• Improved structural integrity of the cold room

For cold room projects utilizing 80 mm panels, BOB-053 is a critical supporting component.

Application Areas

The PVC Base Profile for Cold Room Panel (80 mm) is suitable for a wide range of cold storage applications across multiple industries, including:

• Food storage cold rooms
• Meat, poultry, and seafood processing facilities
• Dairy production and cold storage plants
• Fruit and vegetable storage warehouses
• Pharmaceutical and medical product storage rooms
• Logistics and distribution centers
• Industrial production facilities
• Hotel and restaurant cold rooms
• Supermarket and retail cold storage areas

In all these environments, protecting the panel base ensures hygiene compliance and long-term investment security.

Compatibility with Modular and Industrial Cold Rooms

The BOB-053 PVC Base Profile for Cold Room Panel (80 mm) is fully compatible with both modular and industrial cold room systems. It can be used in new installations as well as renovation and upgrade projects.

Its easy-to-install design reduces installation time and labor costs while ensuring a secure and precise fit.

Bob Modüler Manufacturing Quality

Bob Modüler is a trusted manufacturer with extensive expertise in cold room systems and modular construction solutions. The BOB-053 PVC Base Profile for Cold Room Panel (80 mm) is developed according to real-world operational requirements and strict quality standards.

Key manufacturing advantages include:

• High-quality local production
• Durable PVC raw materials
• Long service life
• Professional project compatibility

Conclusion

The PVC Base Profile for Cold Room Panel (80 mm) is a strategic solution that combines energy efficiency, hygiene, and panel protection in a single component. Manufactured by Bob Modüler, the BOB-053 model forms an effective insulating bridge between the floor and the cold room panel, reducing heat loss, protecting panel bases, and extending system lifespan. It is an essential component for professional cold room projects where reliability and performance are critical.

The BOB-005 PVC Base Profile for Cold Room Panel (100 mm) is designed to fulfill multiple essential functions simultaneously:

1. Preventing Heat Loss

Energy efficiency is a key operational concern in cold storage facilities. Direct contact between the panel and the floor can create thermal bridges, leading to significant heat transfer and increased energy consumption. This PVC base profile:

• Creates an insulating layer between the floor and the panel
• Minimizes cold air leakage
• Enhances overall energy efficiency of the cold room

As a result, internal temperatures remain more stable and refrigeration systems operate more efficiently.

2. Creating a Hygienic Environment

The junction between floor and panel is highly susceptible to moisture, dirt, and bacterial accumulation. The PVC Base Profile for Cold Room Panel (100 mm):

• Prevents contaminants from collecting at the panel base
• Provides a smooth, easy-to-clean transition surface
• Supports hygiene standards in food and pharmaceutical storage areas

The non-porous PVC surface contributes to long-term cleanliness and sanitation.

3. Protecting the Panel and Extending Service Life

Thanks to its specially engineered geometry, the profile prevents the panel’s metal sheet from being exposed directly to floor-level hazards. This design:

• Protects panel surfaces from impact and abrasion
• Reduces moisture-related corrosion risks
• Extends the operational lifespan of cold room panels

This protection is especially valuable in high-traffic industrial cold room environments.

Technical Specifications

• Product Name: PVC Base Profile for Cold Room Panel (100 mm)
• Manufacturer: Bob Modüler
• Product Code: BOB-005
• Compatible Panel Thickness: 100 mm
• Material: High-quality PVC
• Application Area: Base of cold room panels in contact with the floor
• Function: Thermal insulation, hygiene enhancement, panel protection
• Compatibility: Modular and industrial cold room systems

The PVC material maintains its structural stability under low-temperature conditions and does not deform during long-term use.

Importance of Base Profiles in Cold Room Systems

While wall and ceiling insulation often receive the most attention, the panel base area is where thermal bridging and mechanical damage most commonly occur. The PVC Base Profile for Cold Room Panel (100 mm) plays a critical role in maintaining the overall performance and durability of cold room installations.

By preventing direct floor contact, the profile reduces wear on panels while contributing to consistent thermal insulation throughout the structure.

Application Areas

The PVC Base Profile for Cold Room Panel (100 mm) is suitable for a wide range of cold storage applications, including:

• Food storage cold rooms
• Meat, poultry, and seafood processing facilities
• Dairy production and cold storage plants
• Fruit and vegetable storage warehouses
• Pharmaceutical and medical product storage rooms
• Logistics and distribution centers
• Industrial production cold rooms
• Hotel and restaurant cold storage units
• Supermarket and retail cold rooms

In all these applications, protecting the panel base ensures hygiene compliance and long-term system reliability.

Full Compatibility with Modular and Industrial Cold Rooms

The BOB-005 PVC Base Profile for Cold Room Panel (100 mm) is designed to integrate seamlessly with both modular and industrial cold room installations. It is suitable for new projects as well as refurbishment and upgrade applications.

Its user-friendly design allows for quick installation, reducing labor time and installation costs.

Bob Modüler Manufacturing Quality

Bob Modüler is a trusted manufacturer with extensive expertise in cold room systems and modular construction solutions. The BOB-005 PVC Base Profile for Cold Room Panel (100 mm) is developed according to strict quality standards and real-world operational requirements.

Key manufacturing advantages include:

• High-quality local production
• Durable PVC raw materials
• Long service life
• Professional project compatibility

Conclusion

The PVC Base Profile for Cold Room Panel (100 mm) is a strategic solution that combines thermal insulation, hygiene, and panel protection in a single component. Manufactured by Bob Modüler, the BOB-005 model forms an effective insulating bridge between the floor and the cold room panel, reducing energy loss, enhancing cleanliness, and extending panel lifespan. It is an essential component for professional cold room projects where performance and durability are critical.

The BOB-003R-L Cold Room Based Hygienic Profile Closing Cover (Left, Right) is not designed to create internal or external corner transitions. Unlike corner components, its sole purpose is to close the geometric opening at the end of the hygienic base profile.

Its main functions include:

• Sealing the open ends of the BOB-059 hygienic base PVC profile
• Preventing dust, dirt, moisture, and bacteria from entering the profile interior
• Providing immediate protection against sudden bacterial contamination
• Completing the hygienic base profile system up to the final point
• Delivering a clean, finished, and professional visual appearance

With this role, the product acts as a pure closing solution, ensuring that the hygienic profile system remains fully protected from start to finish.

Hygiene Risks at Profile End Points

In cold room applications, hygiene risks are often associated with corners and junctions. However, profile end points are frequently overlooked despite being equally critical. Open profile ends may:

• Allow airborne dust and particles to accumulate inside the profile
• Trap moisture during cleaning processes
• Become breeding zones for bacteria and microorganisms
• Compromise hygiene inspections and long-term cleanliness

The Cold Room Based Hygienic Profile Closing Cover (Left, Right) is engineered specifically to eliminate these hidden risks by fully isolating the profile interior from the cold room environment.

Left and Right Closing Covers for Full Protection

The BOB-003R-L product is supplied as two separate components:

• Right Closing Cover (R)
• Left Closing Cover (L)

This dual configuration allows hygienic base profiles to be sealed from both ends, ensuring complete closure regardless of installation direction. By using both left and right covers:

• The hygienic base profile becomes fully enclosed
• Symmetry and alignment are preserved
• Hygiene continuity is maintained along the entire base line

This feature is especially valuable in long profile runs and complex cold room layouts.

Immediate and Preventive Hygiene Solution

The Cold Room Based Hygienic Profile Closing Cover provides a preventive hygiene measure rather than a corrective one. By closing the profile ends at the time of installation, it prevents:

• Sudden bacterial formation inside the profile cavity
• Contamination caused by cleaning water infiltration
• Long-term hygiene deterioration at unseen locations

This makes the product particularly important in environments where food safety, pharmaceutical integrity, and medical hygiene are strictly regulated.

Aesthetic and Professional Finishing Detail

Beyond hygiene performance, the Cold Room Based Hygienic Profile Closing Cover (Left, Right) also contributes to the visual quality of cold room interiors. It:

• Conceals cut edges of PVC base profiles
• Creates a smooth and finished end detail
• Enhances the overall professional appearance of the floor perimeter

As a result, cold room installations achieve both technical hygiene excellence and visual completeness.

Technical Specifications

• Product Name: Cold Room Based Hygienic Profile Closing Cover (Left, Right)
• Manufacturer: Bob Modüler
• Product Code: BOB-003R-L
• Compatible Product: BOB-059 Cold Room Hygienic Base PVC Profile
• Function: Closing and sealing profile end points
• Application Type: Non-directional (no internal or external corner function)
• Components: Left cover (L) and Right cover (R)
• Compatibility: Modular and industrial cold room systems

Application Areas

The Cold Room Based Hygienic Profile Closing Cover (Left, Right) is suitable for all cold room projects where the BOB-059 hygienic base PVC profile is installed, including:

• Food storage cold rooms
• Meat, poultry, and seafood processing facilities
• Dairy production and cold storage plants
• Fruit and vegetable cold warehouses
• Pharmaceutical and medical product storage rooms
• Logistics and distribution centers
• Industrial kitchens and catering facilities
• Hotel, restaurant, and supermarket cold rooms

In these environments, sealing profile ends is essential for maintaining full hygiene compliance.

Compatibility with Modular and Industrial Cold Rooms

The BOB-003R-L Cold Room Based Hygienic Profile Closing Cover is fully compatible with both modular and industrial cold room systems. Installation is fast and straightforward, requiring no additional machining or special tools.

This ensures reduced installation time, lower labor costs, and minimized risk of hygiene-related installation errors.

Bob Modüler Manufacturing Assurance

Bob Modüler is a specialized manufacturer with strong expertise in cold room systems and hygienic construction components. The BOB-003R-L Cold Room Based Hygienic Profile Closing Cover (Left, Right) is developed based on real installation challenges and hygiene inspection requirements.

Key manufacturing advantages include:

• High-quality local production
• Precise dimensional compatibility
• Long service life
• Reliable performance in professional cold room projects

Conclusion

The Cold Room Based Hygienic Profile Closing Cover (Left, Right) is a critical finishing component for cold rooms using the BOB-059 Cold Room Hygienic Base PVC Profile. By sealing the open ends of the profile, it prevents dust and bacteria from entering the internal cavity, delivers immediate hygiene protection, and completes the system with a clean and professional finish. Manufactured by Bob Modüler, the BOB-003R-L ensures that cold room hygiene is protected even at the most easily overlooked points.

The BOB-002 Cold Room Based Hygienic Profile External Corner is used specifically at the external corner transitions of the BOB-059 Cold Room Hygienic Base PVC Profile. Its primary purposes include:

• Connecting hygienic base profiles at outward-facing corner transitions
• Closing gaps formed at 45° and 90° external corner joints
• Preventing dust, dirt, and hygiene-compromising particles from entering joint areas
• Maintaining continuous hygiene along the cold room floor perimeter
• Enhancing the visual quality of floor-level profile applications

With these functions, the product serves not only as a connector but as a critical hygiene safeguard within cold room flooring systems.

Importance of External Corner Details in Cold Rooms

In cold storage facilities, hygiene risks often originate from transition points rather than flat surfaces. External floor corners are particularly sensitive because:

• Cleaning equipment may not fully reach corner joints
• Micro-gaps can collect moisture and contaminants
• Bacterial growth may occur if these areas are not properly sealed

The Cold Room Based Hygienic Profile External Corner eliminates these vulnerabilities by providing a precise and sealed external corner solution that integrates seamlessly with the hygienic base profile system.

Hygiene Protection and Dust Prevention

The BOB-002 plays a vital role in maintaining the hygiene chain of cold rooms. By sealing exposed external corner joints, it:

• Prevents dust and airborne particles from entering profile connections
• Reduces the risk of contamination after cleaning procedures
• Supports compliance with hygiene audits and inspections

This function is especially important in cold rooms used for food storage, pharmaceutical products, and medical supplies, where hygiene tolerances are extremely strict.

Aesthetic and Professional Floor Finish

In addition to hygiene, modern cold room projects demand a refined and professional visual appearance. The Cold Room Based Hygienic Profile External Corner provides:

• Smooth and symmetrical external corner transitions
• Concealment of cut profile ends
• A continuous and visually consistent floor-level profile design

As a result, the cold room interior gains both technical reliability and aesthetic value.

Technical Specifications

• Product Name: Cold Room Based Hygienic Profile External Corner
• Manufacturer: Bob Modüler
• Product Code: BOB-002
• Compatible Product: BOB-059 Cold Room Hygienic Base PVC Profile
• Application Purpose: External corner connection and gap sealing
• Applicable Angles: 45° and 90° external corner transitions
• Functions: Hygiene protection, dust prevention, aesthetic completion
• Compatibility: Modular and industrial cold room systems

Application Areas

The Cold Room Based Hygienic Profile External Corner is suitable for all cold room projects where the BOB-059 hygienic base PVC profile is applied. Typical application areas include:

• Food storage cold rooms
• Meat, poultry, and seafood processing facilities
• Dairy production and cold storage plants
• Fruit and vegetable cold storage warehouses
• Pharmaceutical and medical product storage rooms
• Logistics and distribution centers
• Industrial kitchens and catering facilities
• Hotel, restaurant, and supermarket cold rooms

In these environments, maintaining sealed and hygienic external corners provides a significant advantage during hygiene inspections and long-term operation.

Full Compatibility with Modular and Industrial Systems

The BOB-002 Cold Room Based Hygienic Profile External Corner is fully compatible with both modular and industrial cold room systems. It integrates seamlessly with hygienic base profiles without requiring additional processing or modifications.

This ensures faster installation, reduced labor costs, and minimized risk of installation errors.

Bob Modüler Manufacturing Assurance

Bob Modüler is a trusted manufacturer specializing in cold room systems and hygienic construction components. The BOB-002 Cold Room Based Hygienic Profile External Corner is developed based on real-world application needs and strict quality standards.

Key manufacturing advantages include:

• High-quality local production
• Precise dimensional accuracy
• Long service life
• Reliable performance in professional cold room projects

Conclusion

The Cold Room Based Hygienic Profile External Corner is an essential complementary component for cold rooms using the BOB-059 Cold Room Hygienic Base PVC Profile. By sealing gaps at 45° and 90° external corner transitions, it prevents dust and contaminants from entering, ensures uninterrupted hygiene at floor level, and delivers a clean, aesthetic finish. Manufactured by Bob Modüler, the BOB-002 guarantees that cold room hygiene is protected down to the smallest detail.

The BOB-001 Cold Room Based Hygienic Profile Internal Corner is specifically used at the inward-turning corner points of the BOB-059 Cold Room Hygienic Base PVC Profile. Its primary functions include:

• Connecting hygienic base PVC profiles at internal corner transitions
• Closing gaps formed between profiles cut at 45° or 90° angles
• Preventing dust, dirt, moisture, and contaminants from entering floor-level joints
• Ensuring uninterrupted hygiene along the cold room base line
• Creating a clean, organized, and professional internal corner finish

With these features, the product is not merely an accessory but a functional and essential component of the cold room floor hygiene system.

Critical Importance of Internal Corners in Cold Room Hygiene

In cold storage facilities, hygiene risks rarely originate from flat surfaces; instead, they typically emerge from detail points such as internal corners. Internal floor corners are particularly sensitive because:

• Cleaning equipment has limited access to these areas
• Water and detergent residues tend to accumulate
• Dirt and organic residues can remain unnoticed for long periods

The Cold Room Based Hygienic Profile Internal Corner is engineered specifically to eliminate these risks. Its full compatibility with the BOB-059 hygienic base profile allows for a perfectly sealed internal corner without leaving any open or vulnerable areas.

Hygiene Continuity and Prevention of Contamination

The BOB-001 plays a critical role in maintaining continuous hygiene at floor level. By sealing internal corner transitions, it:

• Prevents the accumulation of dust and foreign particles
• Eliminates moisture-trapping gaps that may lead to bacterial growth
• Reduces the risk of recontamination after cleaning procedures

These advantages are especially important in cold rooms used for food storage, pharmaceutical products, and medical supplies, where hygiene standards are extremely strict.

Aesthetic and Professional Floor-Level Finish

Beyond hygiene, modern cold room projects also require a high level of visual consistency and professional appearance. The Cold Room Based Hygienic Profile Internal Corner provides:

• Smooth and symmetrical internal corner transitions
• Concealment of cut profile edges
• A continuous and visually uniform hygienic base profile line

As a result, the cold room interior achieves both technical reliability and aesthetic quality.

Technical Specifications

• Product Name: Cold Room Based Hygienic Profile Internal Corner
• Manufacturer: Bob Modüler
• Product Code: BOB-001
• Compatible Product: BOB-059 Cold Room Hygienic Base PVC Profile
• Application Area: Floor-level internal corner transitions
• Applicable Angles: 45° and 90° internal corners
• Functions: Hygiene protection, gap sealing, aesthetic completion
• Compatibility: Modular and industrial cold room systems

Application Areas

The Cold Room Based Hygienic Profile Internal Corner is suitable for all cold room projects where the BOB-059 hygienic base PVC profile is used. Typical application areas include:

• Food storage cold rooms
• Meat, poultry, and seafood processing facilities
• Dairy production and cold storage plants
• Fruit and vegetable cold storage warehouses
• Pharmaceutical and medical product storage rooms
• Logistics and distribution centers
• Industrial kitchens and catering facilities
• Hotel, restaurant, and supermarket cold rooms

In these environments, properly sealed internal floor corners significantly improve hygiene control and inspection outcomes.

Compatibility with Modular and Industrial Systems

The BOB-001 Cold Room Based Hygienic Profile Internal Corner is fully compatible with both modular and industrial cold room systems. It integrates seamlessly with hygienic base PVC profiles and does not require additional machining or modification during installation.

This ensures faster installation, reduced labor costs, and minimized risk of installation errors.

Bob Modüler Manufacturing Assurance

Bob Modüler is a specialized manufacturer with extensive expertise in cold room systems and hygienic construction components. The BOB-001 Cold Room Based Hygienic Profile Internal Corner is developed based on real-world installation requirements and strict hygiene standards.

Manufacturing advantages include:

• High-quality local production
• Precise dimensional accuracy
• Long service life
• Reliable performance in professional cold room projects

Conclusion

The Cold Room Based Hygienic Profile Internal Corner is an essential complementary component for cold rooms using the BOB-059 Cold Room Hygienic Base PVC Profile. By sealing gaps at 45° and 90° internal corner transitions, it prevents dust and contaminants from entering, ensures uninterrupted floor-level hygiene, and delivers a clean, professional finish. Manufactured by Bob Modüler, the BOB-001 guarantees that hygiene is fully maintained at one of the most sensitive points of cold room installations.