cold room door rubber, EPDM door rubber, bob modüler, bob-k6, cold room hinged door rubber, co-ex door rubber, arrow base door rubber, cold storage door sealing, energy efficient cold room, industrial cold room door
Cold Room Door Rubber - BOB-K6 - Image 2

Cold Room Door Rubber – BOB-K6

Cold Room Door Rubber

Cold Room Door Rubber is a high-performance sealing component designed to provide reliable air tightness and thermal insulation in cold room hinged doors. Manufactured by Bob Modüler and supplied under the product code BOB-K6, this door rubber is engineered to prevent cold air leakage, maintain internal temperature stability, and support energy-efficient operation in cold storage facilities.

In cold rooms, doors represent one of the most critical points of thermal control. Even minimal gaps between the door leaf and the frame can lead to cold air loss, condensation, and increased energy consumption. For this reason, door rubbers must combine correct material selection with precise geometry. Cold Room Door Rubber (BOB-K6) is developed to meet these requirements with professional reliability.

Get a Quotation on WhatsApp Request a Quotation via Contact Form

Product Inquiry Form for Cold Room Door Rubber - BOB-K6

CAPTCHA image
SKU: BOB-K6 Category:

Cold Room Door Rubber

Cold Room Hinged Door EPDM Rubber

Importance of Door Rubber in Cold Room Systems

Cold room doors are opened and closed many times during daily operation. Each movement compresses the door rubber, requiring it to recover its original shape immediately after closing. If the rubber loses elasticity or fails to seal properly, several issues may occur:

  • Cold air leakage from the cold room
  • Entry of warm and humid air
  • Condensation and icing around the door frame
  • Increased load on refrigeration systems
  • Higher operating and energy costs

The Cold Room Door Rubber (BOB-K6) is designed to withstand repeated compression cycles while maintaining consistent sealing performance over time.

EPDM Material Advantages

BOB-K6 is manufactured from EPDM (Ethylene Propylene Diene Monomer), one of the most reliable rubber materials used in cold room applications. EPDM is preferred due to its outstanding resistance to environmental and mechanical stress.

Key advantages of EPDM include:

  • Excellent elasticity across a wide temperature range
  • Resistance to low temperatures without hardening
  • High durability against moisture and condensation
  • Long service life with minimal deformation

Thanks to these properties, EPDM door rubbers remain functional even in demanding cold room environments.

Co-Ex Structure: Dual Function in One Profile

The Cold Room Door Rubber (BOB-K6) features a co-extruded (co-ex) structure, meaning that two different EPDM hardness levels are combined in a single profile. This design allows the door rubber to perform two separate functions efficiently.

The co-ex structure consists of:

  • Solid EPDM base inserted into the aluminum door leaf profile
  • Sponge EPDM sealing section that presses against the door frame

This combination ensures both strong mechanical retention and superior sealing performance.

Solid EPDM Base for Secure Fixing

The section of the rubber that fits into the aluminum door leaf profile is made of solid EPDM. This rigid structure provides a strong grip inside the aluminum channel and prevents the rubber from loosening over time.

Benefits of the solid EPDM base include:

  • Firm fixation inside the aluminum profile
  • Resistance to vibration and repeated door movement
  • Long-term dimensional stability
  • Reduced need for maintenance or replacement

Arrow-Shaped Base for Easy Installation

BOB-K6 Cold Room Door Rubber is designed with an arrow-shaped base geometry. This structure allows the rubber to be installed by simply pressing or tapping it into the aluminum profile from above.

Advantages of the arrow-shaped base include:

  • Fast and effortless installation
  • No need for additional adhesives
  • Secure locking inside the aluminum channel
  • Easy removal and replacement during service

Compared to T-shaped base designs, arrow-shaped rubbers are especially suitable for maintenance and service operations, where quick replacement is required.

Sponge EPDM Section for Superior Sealing

The part of the rubber that contacts the door frame is made of sponge EPDM. This softer material compresses easily when the door is closed, filling small gaps and surface tolerances.

This results in:

  • Uniform pressure along the door perimeter
  • Excellent air tightness
  • Prevention of moisture and vapor penetration
  • Improved insulation performance

The sponge EPDM section ensures that sealing quality is maintained even if minor alignment variations occur between the door and the frame.

Difference Between BOB-K6 and BOB-K23

From a technical and functional perspective, BOB-K6 and BOB-K23 are identical products. Both door rubbers share:

  • EPDM material
  • Co-ex structure
  • Arrow-shaped base geometry
  • Application in cold room hinged doors

The only difference is the size and dimensions of the profile. BOB-K6 is produced in a different size to match specific aluminum door leaf profiles and door constructions. This allows manufacturers and installers to select the most suitable rubber according to door design requirements.

Application in Cold Room Hinged Doors

The Cold Room Door Rubber (BOB-K6) is specifically designed for cold room hinged doors. Hinged doors require uniform sealing pressure along all sides of the door leaf. BOB-K6 ensures balanced compression and reliable sealing when the door is closed.

Typical application areas include:

  • Industrial cold storage rooms
  • Food storage and processing facilities
  • Refrigerated warehouses
  • Chilled and frozen storage areas

Contribution to Energy Efficiency

Door rubbers play a direct role in cold room energy performance. BOB-K6 Cold Room Door Rubber helps:

  • Reduce cold air leakage
  • Stabilize internal temperature
  • Lower refrigeration system workload
  • Decrease overall energy consumption

By maintaining effective sealing, the rubber supports long-term energy savings and system efficiency.

Technical Specifications

  • Product Name: Cold Room Door Rubber
  • Manufacturer: Bob Modüler
  • Product Code: BOB-K6
  • Material: EPDM
  • Structure: Co-ex (solid EPDM + sponge EPDM)
  • Base Geometry: Arrow-shaped base
  • Application: Cold room hinged doors

Conclusion

Cold Room Door Rubber (BOB-K6) is a reliable and professional sealing solution developed for cold room hinged doors. With its EPDM co-ex structure, arrow-shaped base geometry, and high elasticity, it ensures easy installation, long service life, and excellent sealing performance. Although functionally identical to BOB-K23, BOB-K6 offers an alternative size option to suit different door constructions. For manufacturers and installers seeking dependable door sealing with service convenience and energy efficiency, BOB-K6 is a proven choice.

Related products