pvc frame profile, back cover profile, bob-10014, cold room pvc profile, cold room sliding door frame, modular frame system, cold storage door frame, bob modüler, sliding door frame profile, cold room door system

PVC Frame Profile – BOB-10014

The PVC Frame Profile (Back Cover Profile) is a complementary finishing component used exclusively in cold room sliding door frame systems. Manufactured by Bob Modüler and supplied under the product code BOB-10014, this profile is designed to close and protect the rear-facing surface of the sliding door frame, delivering a complete, hygienic, and professional installation.

Cold room sliding doors—such as manual sliding doors, monorail sliding doors, and automatic sliding doors—operate within temperature-controlled environments where insulation integrity and hygiene are critical. After the frame depth is adjusted using modular extension profiles, the wall-facing rear side of the frame remains exposed. The PVC Frame Profile (Back Cover Profile) is engineered to seal and finish this area, ensuring durability, cleanliness, and visual continuity.

Get a Quotation on WhatsApp Request a Quotation via Contact Form

Product Inquiry Form for PVC Frame Profile - BOB-10014

CAPTCHA image
SKU: BOB-10014 Category:

Function of the PVC Back Cover Profile

Sliding door frames in cold rooms are produced using modular PVC systems to match varying wall panel thicknesses. Once the main frame and extension profiles are installed, an exposed rear section may remain.

The BOB-10014 PVC Frame Profile (Back Cover Profile) performs the following functions:

  • Fully covers the rear surface of the sliding door frame
  • Creates a clean transition between the frame and the cold room wall panel
  • Prevents dust, moisture, and dirt accumulation
  • Enhances hygiene and simplifies cleaning
  • Completes the frame installation structurally and visually

Without a back cover profile, sliding door frames would remain unfinished, increasing hygiene risks and reducing installation quality.

Use in Cold Room Sliding Door Frame Systems

The BOB-10014 is designed only for cold room sliding door frames. Because sliding doors move horizontally, precise frame geometry and clean finishing are essential for smooth operation and long service life.

Using the PVC Frame Profile (Back Cover Profile) ensures:

  • A fully enclosed and finished frame
  • Seamless integration with wall panels
  • Higher hygiene standards in cold storage areas
  • A professional, uniform appearance

For these reasons, BOB-10014 is considered a mandatory finishing element in modular sliding door frame systems.

Role in the Modular PVC Sliding Door Frame System

Bob Modüler’s modular PVC sliding door frame system is designed to adapt efficiently to different wall panel thicknesses. The system consists of:

  1. Main PVC sliding door frame profile
  2. PVC extension profiles
  3. PVC Frame Profile (Back Cover Profile) – BOB-10014

Within this structure, BOB-10014 finalizes the installation by closing the rear side of the frame after depth adjustment, delivering a complete and robust assembly.

Compatible PVC Frame Profiles

The PVC Frame Profile (Back Cover Profile) is fully compatible with the following PVC profiles used in cold room sliding door frame systems:

  • BOB-10063 – Main PVC frame profile for cold room sliding doors
  • BOB-10012 – 20 mm PVC extension profile (sliding door systems)
  • BOB-10110 – 30 mm PVC extension profile (sliding door systems)
  • BOB-10028 – 60 mm PVC extension profile (sliding door systems)
  • BOB-10027 – Header profile used at the upper section of sliding door frames

This compatibility enables seamless integration into modular frame configurations.

Advantages of PVC Material

Manufactured from high-quality PVC, BOB-10014 offers key advantages:

  • Low thermal conductivity to prevent thermal bridges
  • High resistance to moisture and condensation
  • Hygienic, easy-to-clean surface
  • Corrosion-free and non-oxidizing structure
  • Long service life with minimal maintenance

These properties make PVC ideal for PVC frame profiles, cold room PVC profiles, and cold storage sliding door systems.

Installation and Production Process

During installation of cold room sliding door frames, the PVC Frame Profile (Back Cover Profile) is applied as follows:

  1. Install the main sliding door frame profile
  2. Add required extension profiles to reach wall panel thickness
  3. Cut the back cover profile to exact frame dimensions
  4. Fix it to the extension profiles using a snap-fit (hammer-in) method
  5. Fully close the rear surface to complete installation

This process is fast, clean, and does not require welding.

Areas of Application

  • Cold room sliding door frames
  • Cold room monorail sliding door frames
  • Cold room automatic sliding door frames
  • Industrial cold storage facilities
  • Food processing and logistics cold rooms

Technical Specifications

  • Product Name: PVC Frame Profile (Back Cover Profile)
  • Manufacturer: Bob Modüler
  • Product Code: BOB-10014
  • Material: PVC
  • Application Area: Cold room sliding door frame systems
  • Compatible Profiles:
    • BOB-10063
    • BOB-10012
    • BOB-10110
    • BOB-10028
    • BOB-10027
  • Installation Method: Snap-fit (hammer-in)
  • System Type: Modular PVC sliding door frame system

Conclusion

The PVC Frame Profile (Back Cover Profile) – BOB-10014 is a critical finishing component used exclusively in cold room sliding door frame systems. By closing the rear surface of the frame, it ensures hygiene, durability, and professional installation quality. Manufactured by Bob Modüler, BOB-10014 integrates seamlessly with modular PVC frame systems and delivers reliable performance for modern cold storage projects.

Related products