Single Square Nut M10 – BOB-KS1

Single Square Nut M10

Importance of Secure Ceiling Panel Installation in Cold Storage

As previously explained in ceiling suspension system components such as the BOB-TAA101, cold room ceiling panel installation is a direct safety issue, not merely an assembly task. Ceiling panels are exposed to:

• Their own dead weight
• Long spans and wide openings
• Temperature fluctuations
• Long-term mechanical stress

If ceiling panels are not properly suspended, serious risks may occur, including panel sagging, joint separation, thermal leakage, and even panel collapse. Therefore, every fastening element used in the suspension system must be mechanically reliable and perfectly compatible with the carrier profiles.

The Single Square Nut M10 is one of the most important elements in this safety chain.

Function of the Single Square Nut M10

The Single Square Nut M10 is used primarily in cold storage ceiling suspension systems that incorporate Cold Room Ceiling Aluminum Suspension Profiles, specifically:

• BOB-7166 Cold Room Ceiling Aluminum Profile
• BOB-8010C Cold Room Ceiling Aluminum Profile

These aluminum profiles are typically manufactured in 6-meter lengths and feature a special internal channel geometry. The square shape of the nut allows it to fit precisely into this channel, preventing rotation and ensuring a secure mechanical connection.

Once placed inside the aluminum profile channel, the Single Square Nut M10 works together with an M10 threaded metal rod to suspend ceiling panels from the upper structure.

Working Principle with Aluminum Ceiling Suspension Profiles

The suspension system using the Single Square Nut M10 operates as follows:

1. Aluminum ceiling suspension profiles are installed along the ceiling line
2. The Single Square Nut M10 is inserted into the internal channel of the profile
3. The square geometry prevents the nut from rotating inside the profile
4. An M10 threaded metal rod is screwed into the nut
5. The upper end of the threaded rod is fixed to the building’s structural framework
6. Ceiling panels are carried safely via the aluminum profile and square nut

This system ensures that loads are transferred vertically and evenly, rather than being carried only by the panel joints.

Supports Two Ceiling Panels Simultaneously

Due to the geometric design of cold room ceiling aluminum profiles, each profile is capable of carrying two adjacent ceiling panels at the same time. This dual-panel support is only possible when used together with the Single Square Nut M10.

Key advantages of this configuration include:

• Balanced load distribution on both sides of the profile
• Increased structural stability at panel joint lines
• Reduced number of suspension points
• Improved ceiling alignment over long spans

This makes the Single Square Nut M10 especially important in large cold storage rooms where ceiling spans are wide and panel weight is high.

Mandatory Component in Aluminum Ceiling Suspension Systems

The Single Square Nut M10 is not optional in systems that use aluminum ceiling suspension profiles. It is a mandatory fastening element in all installations where BOB-7166 or BOB-8010C profiles are used.

Without this square nut:

• The threaded rod cannot be safely fixed
• The aluminum profile cannot transfer load correctly
• Ceiling panel safety is compromised

For this reason, the Single Square Nut M10 must be used in every aluminum suspension system without exception.

Galvanized or Stainless Steel Construction

The Single Square Nut M10 is manufactured from high-strength metal materials suitable for cold storage environments. Depending on project requirements, it is produced from:

• Galvanized steel sheet, or
• Stainless steel sheet

Material advantages include:

• High resistance to corrosion
• Long service life in cold and humid environments
• High load-bearing capacity
• Resistance to deformation under continuous load

These properties ensure reliable performance in demanding cold storage conditions.

Recommended Installation Spacing

For optimal load distribution and ceiling safety, the Single Square Nut M10 is typically installed at intervals of approximately 150 cm along the aluminum suspension profile.

This spacing:

• Prevents aluminum profile sagging
• Maintains ceiling panel alignment
• Distributes loads evenly across the structure
• Enhances long-term structural reliability

Adhering to the recommended spacing is essential for system performance and safety.

Application Areas

The Single Square Nut M10 (Bob-KS1) is widely used in:

• Large cold storage facilities
• Industrial cold rooms
• Aluminum ceiling suspension systems
• Food storage and processing facilities
• Meat, dairy, and seafood cold rooms
• Logistics and distribution centers

It is suitable for both new installations and large-scale cold storage projects.

Technical Specifications

• Product Name: Single Square Nut M10
• Manufacturer: Bob Modüler
• Product Code: Bob-KS1
• Material: Galvanized steel or stainless steel
• Thread Type: M10
• Compatible Systems: Aluminum ceiling suspension profiles
• Recommended Spacing: 150 cm

Conclusion

The Single Square Nut M10 (Bob-KS1) is a small yet essential component in professional cold storage ceiling suspension systems. When used with aluminum ceiling suspension profiles, it enables the safe and balanced support of two ceiling panels simultaneously, ensuring long-term structural stability and safety.

Thanks to its durable metal construction, precise fit within aluminum profile channels, and compatibility with M10 threaded rods, the Single Square Nut M10 is an indispensable fastening element for modern cold storage facilities. Manufactured by Bob Modüler, it provides reliability, safety, and performance where ceiling security is critical.